Valley-Vans

Suspension Polyurethane Bushings See Manufacturer’s Catalog For More Applications • Jeep ® is a registered trademark of FCA US LLC. 181 E12 Hyper-Flex® performance polyurethane sway bar and end link sets from Energy Suspension make your vehicle’s sway bar system much more effective, similar to using a larger diameter performance anti-sway bar. Replace and upgrade soft rubber bushings for improved handling and control. Greaseable bushings feature zerk type fittings and channels for grease to migrate to where it is needed. Many sway bar and end link sets have heavy-duty hardware. Zerk fittings and a unique channel design, allows grease to flow to all inner bushing surfaces to help reduce possible squeaking. Use dimensional drawings below for proper size for your application. Bolt slot dimensions - for 10mm or 3/8". Choose the sway bar bracket size that most closely matches your vehicle’s existing brackets. Sway Bar Bushing Sets Greaseable Sway Bar Bushings Not recommended for fullsize pickups Common GM truck style Car Style Part No. Truck Style Part No. Bar Diameter “A” 95151_ — 7/16"/11mm 95152_ — 1/2"/13mm 95153_ — 9/16"/14mm 95154_ — 5/8"/16mm 95155R — 11/16"/17.5mm 95156_ — 3/4"/19mm 95157_ — 13/16"/20.5mm 95158_ — 7/8"/22mm 95159_ — 23mm 95160_ — 15/16"/24mm 95161_ — 1"/25mm 9516R 95169_ 1-1/16"/27mm 95163_ — 28mm 95164_ 95170_ 1-1/8"/28.5mm — 95171_ 1-3/16"/30mm 95165_ — 1-1/4"/31.5mm 95166 — 32mm 95167_ — 1-5/16"/33mm 95168_ 95173_ 1-3/8"/35mm Part No. “A” Length 98122_ 1" 98120_ 1-5/8" 98123_ 2" 98125G 2-3/8" 98117_ 2-5/8" 98118_ 2-7/8" 98119_ 3-3/8" 98124_ 3-9/16" 98149G 4-1/4" 98121_ 4-1/2" For product color place G = Black or R = Red after each part number Sway Bar End Links Outlasts and outperforms rubber bushings, Energy’s end link set includes poly bushings and heavy duty, zinc plated 3/8" hardware. Use chart only when vehicles are not listed in the application section. TO FIT: Vehicle must be supported on wheels and on level ground (not jacked up) • Make sure stabilizer bar and eyelet (B) is parallel with control arm (C) • Many times they are not. You may be required to use a slightly longer or shorter sleeve length than original. • Measure sleeve length (A) and compare to the chart to find the correct set Sway Bar End Link Bushings Part No. 98105_ Part No. 98106_ Fits most domestic cars, mini trucks and import models that use a conventional style end link system. Includes: 8 grommets and 8 heavy gauge washers. I.D. – 3/8", Nipple O.D. – 11/16", O.D. – 11/8", O.A.L. – 3/4" (Grommets only) Fits many cars and mini trucks. 8 per set. I.D. – 3/8", Nipple O.D. – 5/8", O.D. – 1", O.A.L. – 11/16" Control Arm Bushings • Maintains better alignment while cornering, stopping and hard launching than O.E.M. rubber and lasts much longer • Full floating, non-binding performance polyurethane • A must for both lowered and raised vehicles! • Controls wheel hop while improving overall handling