Valley-Vans

Engine Ignition Systems See Manufacturer’s Catalog For More Applications • Jeep ® is a registered trademark of FCA US LLC. 968 M46 Routing spark plug wires is an art form. It takes patience and time to route your wires away from the headers, through separators and to the distributor cap. Some wire sets fit perfect, but a lot of people want to build their own so they can route them exactly how they see fit. Our Universal spark plug wire sets come with the spark plug terminal and boot installed with the other end open. Distributor cap boots and terminals are included so you can cut the wire to the desired length, then install the terminal with the supplied Mini-Stripper-Crimper. It’s a little more work, but in the end it will be worth it. 8.5 mm Super Conductor Wire Sets • The Super Conductor is the best performance wire available! • Less than 50 Ohms per foot resistance • High EMI suppression capabilities • Dual Crimp terminals for strength • Thick, heat resistant sleeve and boots Ignition Coils • Retro good looks with modern power • Applications to work with Points, Mallory Unilite and HyFire CD ignitions Part No. 29129 Part No. 29440 Part No. 30480 Ceramic Boot Spark Plug Wires • 8.0mm Silicon wires • Wire temperature rated at 550°F • Ceramic Boots temperature rated up to 2000°F • 240 – 360 Ohms of resistance per foot of wire Part No. 937C Part No. 938C Part No. 947C Unilite Distributors • Available for Ford, Ford Flathead, Chevy, Chrysler, Pontiac, Olds and AMC • Electronic ignition with a one-piece self-contained optical pickup and module • Quick and simple 3 wire hookup • Includes cap and rotor with brass terminals • Can be used standalone with high performance coils such as the Mallory Promaster Series or add on more power with HYFIRE CD ignition controls • Compact design for tight clearance applications such as blowers and tight firewall clearance • Fully adjustable mechanical advance • Classic Mallory look and styling • Strong .500”, QPQ coated distributor shaft guided by a ball bearing for long life and great performance Part No. 3755101 HyFire Street Ignition Part No. 690 • Capacitive discharge technology for full ignition power throughout the rpm range • Multiple sparks improve starting and idle • Easily connects to points, amplifiers and magnetic pickup distributors • Adjustable rev limiter for overrev protection adjustable in 100 RPM increments • Retro design with modern ignition technology HyFire race Ignition Part No. 695 • Two stages of rev limiting built in for staging and racing • High output with up to 135 mJ of spark energy delivering power at any RPM • Accepts Hall-effect, points and mag pickup triggers • Controlled by a fast, efficient digital processor keeping timing rock steady • Retro design with modern technology