evb

56 More Applications Available Part No. Application BP5160022 07-15 Jeep ® JK Wrangler (With 3.5"-4.5" Lift) Front BP5160023 07-15 Jeep ® JK Wrangler (With 3.5"-4.5" Lift) Rear VM80010014 JK Front Shock and Reservoir Mount Kit VM80010015 JK Rear Shock and Reservoir Mount Kit Part No. Application OMESD48 Steering Stabilizer FK50 Relocation Bracket 07-16 Jeep ® Wrangler JK 2-4DR Complete Kits Part No. Description Lift OMEJK2DLKS 5,10,11 Gas - Stock/Light Load (0-90LBS) 2-2.25" OMEJK2DHKS 5,10,11 Gas - Heavy Load 2-2.25" OMEJK4 5,9,10 Gas - Light Load/Heavy Load 8 4" 5 Kit contains standard Old Man Emu Shocks 8 Due to variations in vehicle weights (aftermarket accessories), trim packers are included to adjust the ride height 9 When fitting larger tires,aftermarket wheels (rims) with greater offset (less backspacing) may be required to clear swaybar links and control arms. 10 Optional J.E.Reel Front replacement drive shaft andT-Case yoke.Rated for 0-6”of lift.Fits 2-Door and 4-Door models.Required for 2012+ models when fitting OMEJK4.Optional when fitting OMEJK4 to 07-11 models 11 Kit does not include optional OMESD48 steering damper or damper fit kit FK50 97-06 Wrangler TJ, Unlimited Complete Kits Part No. Description Lift OMETJLKS 1,8,10 Stock/Light Load (0-90LBS) 2" OMETJHKS 1,8,10 Heavy Load (90-180LBS) 2" 1 AppropriateT-Case spacer kit is mandatory to prevent driveline vibration. 5 Only and are not intended for use with any Old Man Emu systems.Modified bump stops are required. 8 Kit contains Old Man Emu Nitrocharger Sport Shocks 10 Due to a variance in curb weight,Rubicon models may not gain the full advertised lift height 99-04 1 Grand Cherokee WJ Complete Kits Part No. Description Lift OMEWJLK 2 Stock/Light Load (0-90LBS) 1.50" OMEWJHK 2 Heavy Load (90-200LBS) 1.50" 2 Some Dana 35’s 4.10 gear sets,may require a high speed carrier air locker.(RD103) STEERING STABILIZER Jeep ® JK and TJ Wrangler and Unlimited 2 and 4 door • 9 stage coil spring valving: For optimum performance • 14mm piston rod: Stronger than the original • Rubber dust boot: Protects the piston rod against stone damage • 35mm piston and bore: Increased oil volume • Twin tube design: Protects the internal components against stone damage • Multi lip seal: Prevents oil loss • Bypass technology with remote reservoir for increased oil volume and travel • Hard anodized aircraft-grade aluminum resists heat and corrosion • Independently adjustable in both rebound and compression • 100% Rebuildable and re-valveable BP-51 HIGH PERFORMANCE SHOCK ABSORBERS